The fixture has an orientation-sensitive internal switch in the mounting bracket. An arrow marking on the bracket indicates the correct upward direction — the LED will only turn on when the arrow points upwards. Installing the bracket inverted (arrow pointing down) will prevent the lamp from lighting, even if the wiring is correct.

This is a deliberate safety/orientation design choice — it ensures the fixture is always installed with the proper internal balance for the LED driver. Confirm the arrow direction before tightening the mounting screws to avoid having to dismount and re-install. See the orientation guide image above for reference.

Five configurations, with two single-globe accents and three vertical column statements:

Small Ball: ∅ 10 cm / ∅ 3.9″ — single small globe, 5W. Best as a compact bedside or hallway accent.
Large Ball: ∅ 15 cm / ∅ 5.9″ — single mid-sized globe, 8W. Best as a primary bedside light or vanity flanking.
H 65 cm Column: 15 × 20 × 65 cm — vertical bracket with single globe, 13W. Best for bedsides, hallways, vanities.
H 78 cm Column: 10 × 20 × 78 cm — vertical bracket with two globes, 15W. Best for foyers, stairwells, statement walls.
H 85 cm Column: 15 × 20 × 85 cm — vertical bracket with two globes, 18W. Best for grand foyers and two-story walls.

For paired flanking installations (mirrors, headboards), the single globe configurations or the H 65 cm column give the cleanest visual symmetry. For statement focal pieces, the H 78 cm or H 85 cm dual-globe columns deliver the most architectural presence.

Integrated LED means the LED light source is built directly into the fixture — there's no separate bulb to insert, no socket exposed, and no light source to replace under normal use. Modern integrated LEDs are rated for 30,000 to 50,000 hours of use (roughly 25-40 years at 3 hours per day), so for the practical lifetime of the lamp, no replacement is needed.

Each Vertical Globe configuration has its own integrated LED tuned to the appropriate wattage (5W for the small ball up to 18W for the dual-globe H 85 cm column). All emit a warm-white color temperature for a candle-like, flattering glow through the matte white globes.

Hardwires to a standard wall junction box. The brass body mounts via the included bracket — arrow side up — with electrical wires entering through the back. Requires an external wall switch (not included). Indoor dry locations only (IP20).

Watch the installation walkthrough video above before installing — it shows the arrow orientation and the bracket attachment sequence. An electrician is recommended unless an existing wall J-box is already in place.

The standard Vertical Globe is not dimmable — it operates as on/off only via a wall switch. The integrated LED runs at full warm-white brightness whenever powered.

If dimming is important to your install, contact support@dekorfine.com before ordering to inquire about availability of a dimmable version for your selected configuration.

The Vertical Globe family pairs effortlessly with contemporary, glam-minimalist, transitional, and modern luxe interiors. Best placements by configuration:

Small Ball / Large Ball: bedside reading lights (paired flanking a headboard), hallway accents at intervals, vanity flanking a mirror.
H 65 cm Column: bedrooms, vanities, single bedside accent, hallway rhythm.
H 78 cm / H 85 cm Column: foyers, stairwells, two-story entrance walls, statement living-room flanking.

Pairs especially well with cream walls, walnut wood, brass hardware, marble accents, and warm-neutral textile palettes.

Dekorfine offers a 30-day return policy on undamaged items in their original packaging. Because the integrated LED is a non-replaceable component, please test the fixture during the return window — and confirm the arrow is pointing up before assuming a fault — to verify satisfactory operation.

For returns, exchanges, or any questions, contact support@dekorfine.com — we reply within 24 hours.