High-fidelity 3D modeling
Visualize your custom chandelier in exquisite detail. Photoreal renderings and rotating models confirm every dimension, finish, and proportion before a single part is cast.
No results found
Try a different term, or browse our collections
A contemporary ceiling pendant with an articulated black metal swing arm that lets you reposition the light horizontally — paired with a wide, shallow walnut-toned shade, brass collar, and a frosted acrylic diffuser hiding an integrated LED with warm / cool dual-color-temperature switching. Suited to dining tables, kitchen islands, workspaces, reading corners, and living-room seating areas.
Most ceiling pendants are anchored exactly where the junction box sits — you accept the placement the room gives you. The Nano refuses that constraint. Its articulated black metal swing arm pivots horizontally from the canopy, letting you reach the light over a dining table that's not centered under the box, an off-center kitchen island, or a workspace that rearranges. Pull it across; push it back; reposition for a new layout.
Hanging from the end of the arm: a wide shallow walnut-toned shade with a brass collar, housing a frosted acrylic diffuser that softens the integrated LED into an ambient downward glow. Pairs effortlessly with mid-century modern, industrial-chic, contemporary, transitional, warm-classic, and workshop-aesthetic interiors.
The integrated LED supports both warm light (cozy, dinner-party, evening atmosphere) and cool light (focused, task-friendly, daylight clarity). Toggle between them using your wall switch — no app, no remote required. One fixture, two distinct lighting moods to match what the room is doing.
A three-element composition — black metal swing arm + canopy, brass collar, and a walnut-toned shade. Sold as one fixed combination.
The black metal arm is articulated at the ceiling canopy, allowing you to pivot it horizontally to reposition the pendant where you need it — useful when the ceiling junction box isn't directly above your dining table, kitchen island, or workspace. Once positioned, the arm holds firm friction so the pendant stays where you place it.
The arm also folds against the ceiling for a more compact profile when needed. For exact reach measurements at each size, refer to the Specifications PDF in the Downloads section above.
The Nano supports two color temperatures through the wall switch — no app, remote, or smart-home setup required. Click the wall switch in quick sequence (the typical pattern is on → off → on within ~2 seconds) to cycle the LED through warm light and cool light modes. Refer to the Installation PDF for the exact toggle pattern with your unit.
Warm light: roughly 2700-3000 K — cozy, dinner-table, evening atmosphere.
Cool light: roughly 4000-5000 K — focused, task-friendly, daylight clarity.
All three sizes share the same 12 cm shade height and the same swing-arm system — they differ only in shade diameter and LED power output:
Dia 25 cm · 20 W: compact — for breakfast nooks, workspaces, smaller seating areas, or single accent lighting.
Dia 35 cm · 30 W: standard — for typical dining tables (1.4-1.8 m), kitchen islands, or living-room accents.
Dia 45 cm · 35 W: large — for long dining tables (2 m+), open-plan rooms, or where the pendant becomes a sculptural focal point.
The Nano uses an integrated LED module — sealed into the shade and not user-replaceable. Modern integrated LEDs are typically rated for 25,000-50,000 hours, roughly 17-34 years of average household use. If your unit experiences an LED failure within the warranty period, contact support@dekorfine.com for module-replacement service.
The fixture is not externally dimmable — because the LED is integrated and supports color-temperature switching via wall-switch toggle, adding a wall dimmer can interfere with the warm / cool toggle and damage the LED. Use the built-in warm / cool modes for mood control instead.
The Nano is a ceiling-mounted hardwired pendant — it mounts to a standard ceiling junction box and connects to a common wall switch (not included). The pendant ships with a 150 cm / 59″ cord (extendable on request).
Installation should be performed by a licensed electrician unless you're experienced with line-voltage wiring. Refer to the Installation PDF in the Downloads section for the wiring diagram and the exact wall-switch sequence for warm / cool toggling.
The walnut-and-black composition with articulated swing arm pairs effortlessly with mid-century modern, industrial-chic, contemporary, transitional, warm-classic, and workshop-aesthetic interiors. Best placements:
Off-center dining table: the swing arm reaches the table even when the junction box isn't centered above it — a common older-home challenge.
Kitchen island / breakfast bar: position over food prep, then swing aside when not needed.
Workspace / writing desk: warm light for evening reading, cool light for focused work — same fixture.
Reading corner: reposition for book reading, then push back for ambient.
Living-room seating areas: the arm lets the light reach a sofa or accent chair away from the ceiling junction box.
30-day return policy on undamaged items in original packaging. Subtle variation in walnut-finish wood grain across individual units is part of the natural-material character — not a defect. Contact support@dekorfine.com for returns or questions — we reply within 24 hours.
Questions? support@dekorfine.com — we reply within 24 hours.
Downloads
Only documents on file are shown · 3D files on request: support@dekorfine.com
Thirty days, simply stated
Transform your concept into reality. Our dedicated design team delivers precise 2D drawings, high-fidelity 3D visualizations, and tailored customization for projects of any scale, anywhere.
Three ways our studio supports your project — from first sketch to signed-off installation plan.
Visualize your custom chandelier in exquisite detail. Photoreal renderings and rotating models confirm every dimension, finish, and proportion before a single part is cast.
Receive the technical specifications and blueprints — AutoCAD and PDF — that your architects, contractors, and electricians need for seamless site integration.
Guidance on scale, placement, and lumen output — so your fixture feels inevitable in its room, whether grand foyer or intimate dining corner.
Our in-house specialists focus exclusively on lighting — structurally sound, trend-aware, and quietly obsessive about every joint and filament.
We respect your timeline. Concept drawings and visualizations arrive quickly, so decisions — and project kick-offs — aren't held hostage by approvals.
From adjusting dimensions and finishes to designing a fixture from scratch — personalized work, at prices that remain fair to both sides.
We've collaborated on a spectrum of high-specification projects worldwide — here is what the last few years look like in numbers.
Reach out to our studio for a complimentary consultation on 3D modeling, technical drawings, or bespoke customization.
Contact our design studioWhy Dekorfine
We design, engineer and manufacture lighting in-house — from the first sketch to the last carton sealed for shipping — and ship it to homes, hotels and design studios in more than 60 countries.
Where the Nano Swing Arm Pendant Light lives
Complete the room
Continue browsing
Explore by room
Kitchen island463 pieces
Dining room330 pieces
Living room597 pieces
Bedroom398 pieces
Hotel & hospitality1456 pieces

Dekorfine · Bespoke
Dimensions, finishes, materials and light source — adjusted to a room rather than a catalogue. We draw it first, you decide after.
Trade & wholesale
Retailers, interior designers and hospitality professionals: verified trade accounts, up to 35% off retail, reviewed within 1 business day. FOB · EXW · CIF · DDP available.
Apply for a trade accountProfessional & hospitality