The ∅ 17.7″ suits bedrooms, entryways, nurseries and home offices of roughly 10 × 10 ft up to 12 × 14 ft. The ∅ 23.6″ works as the main light in living rooms and primary bedrooms of about 14 × 16 ft and up. Both share the same 12.6″ height.

At 12.6″ (32 cm) tall, it leaves about 6 ft 11 in (212 cm) of clearance on an 8 ft ceiling – just under the recommended 7 ft for walkways. On an 8 ft ceiling, center it over a bed, table or seating area; in a hallway or entryway, it is best on ceilings of 8.5 ft or higher. It is hardwired to a standard ceiling junction box and controlled by a common wall switch (not included). We recommend installation by a licensed electrician.

This fixture takes E26 or E27 bulbs. Use A19/A60 LED bulbs at about 8–10W in warm white (2700 K); LEDs stay cool next to the fabric, and the pleated shade softens them into a warm, flattering glow. Bulbs are not included. E26 vs E27 guide →

Dust the shade with a soft brush or a vacuum brush attachment on low, working along the pleats and gently around the braided trim. Spot-clean a mark with a barely-damp cloth and let it air-dry; avoid soaking the fabric, which can loosen the pleats. Wipe the canopy and finial with a soft, dry cloth. Switch off at the wall and let the bulbs cool first.