A swag light is a pendant that hangs by routing its cord through ceiling hooks, then plugs into a regular wall outlet — no electrical wiring or junction box required. The cord typically swags (drapes) from the pendant, up to a hook at the desired hanging point, then over to a second hook near the wall, and down to the outlet.

Installation: (1) Anchor the two included ceiling hooks where you want the pendant and where the cord routes toward the wall. (2) Drape the cord through both hooks. (3) Plug the switch plug into a standard wall outlet. (4) Add an E26 / E27 bulb. (5) Press the inline push-button switch to turn on. No electrician needed.

This makes swag lights ideal for renters, spaces without overhead wiring, or rooms where you want a pendant exactly where the existing junction box isn't.

All six models share the same concrete material, metal hardware, E26/E27 bulb base, and 450 cm cord — only the shade silhouette differs:

Slim & tall (Model A, ∅ 6 cm × H 35 cm): Most architectural read; best for narrow spaces, single-pendant accents, or beside a console.
Tall cones (Model B, ∅ 10 cm × H 34 cm; Model C, ∅ 12 × H 26): Classic industrial pendant proportions; best over kitchen counters and breakfast bars.
Wide cone (Model D, ∅ 15 cm × H 25 cm): Mid-bell silhouette; best over a single bedside or small table.
Bowls (Model E, ∅ 21 × H 22; Model F, ∅ 25 × H 20): Wider light spread; best over dining tables, larger islands, or open-plan kitchens.

Sizing rule: pick a shade diameter roughly 1/3 the width of the surface below it for a balanced read.

The cord is 450 cm / 177″ (≈ 14.8 ft) — generous by design to allow swag routing through 2 ceiling hooks plus the run down the wall to a standard outlet. For an 8-foot ceiling installation with the pendant centered ~3 ft from the wall, you'll typically use about 11 ft of cord, leaving comfortable slack at the plug end.

For taller ceilings, longer routes, or installations far from any outlet, contact support@dekorfine.com — we can extend the cord on request.

One E26 / E27 screw-base bulb per pendant (LED or Edison; not included). E26 in North America, E27 in Europe. Because the concrete shade is opaque, light comes from the open bottom — vintage Edison-filament bulbs show off particularly well as a focal point.

The lamp is not dimmable — the inline push-button switch is on/off only. For adjustable warmth, choose a smart bulb with phone-app dimming.

Very close, but not always identical. Each shade is cast in concrete, and the casting process produces small natural variations between units: subtle surface texture, micro pinholes, slight color tone differences, and minor edge irregularities. These are part of authentic concrete craftsmanship — not defects.

If you want to see your specific batch before purchase, contact support@dekorfine.com.

The concrete-and-metal silhouette pairs effortlessly with industrial, urban-loft, modern farmhouse, Scandi-industrial, contemporary, and minimalist interiors. Best placements: above dining tables, kitchen counters and islands, breakfast bars, beside reading chairs and bedsides, in stairwells, and over home-office desks.

Pairs especially well with raw wood, exposed brick, leather, blackened steel, cement floors, and warm-neutral textiles.

Dekorfine offers a 30-day return policy on undamaged items in their original packaging. Because each shade is individually cast in concrete, slight variations in surface texture, color tone, and edge finish between units are part of authentic handcrafted production and not eligible for return as defects.

For returns or questions, contact support@dekorfine.com — we reply within 24 hours.