Both models share the same dimensions (W 27.2″ × H 4.3″ / W 69 × H 11 cm) and the same materials (brass arm + walnut backplate). The only difference is the switching:

Model A: No integrated switch — power is controlled entirely by an external wall switch you wire to. Cleanest backplate appearance with no visible hardware beyond the mounting screws.
Model B: Adds a toggle switch directly on the backplate — flip up/down for on/off without reaching for the wall switch. Convenient for bedside placements where you want quick local control.

Both models still require an external wall switch in the wiring loop — the toggle on Model B is a secondary local control, not a replacement for hardwiring.

The Kane measures W 27.2″ × H 4.3″ (W 69 × H 11 cm) at full extended reach. Because the arm has three pivots, the actual footprint depends on how you fold it — extended fully, the dome reaches about 27 inches from the wall; folded flat, it sits much closer to the backplate.

The walnut wall backplate is a low-profile rectangle that mounts flush against the wall.

The arm-joint connectors are made via die-casting — a process where molten brass is injected into a steel mold under high pressure, then cooled and released. Die-casting is the standard manufacturing method for structural metal connectors because it produces strong, dimensionally precise parts.

A natural side effect is that the surface may show fine parting lines (where the two halves of the mold met) or subtle hairline texture marks (where the metal cooled in the mold cavity). These are normal characteristics of die-cast manufacturing, not defects, and they do not affect the structure, safety, or normal use of the lamp. They are not eligible for return as defects.

See the close-up reference image above. If precise surface finishing is critical for your project, please contact support@dekorfine.com before ordering.

The Kane hardwires to a wall power source. The walnut backplate mounts to the wall via concealed screws, with electrical wires entering through the back. Both Model A and Model B require an external wall switch in the line — the toggle switch on Model B is a secondary local control, not a replacement for the wall switch.

An electrician is recommended unless you're confident with wall lighting installations. The fixture works on standard 110–240 V residential power.

The Kane is purpose-built for positionable focused light. Best placements:

Bedside — fold over the bed for reading, then swing back to the wall when not in use.
Reading nook or armchair — angle the dome over a book without taking up floor space.
Home office or writing desk — extend across the desk for task light without footprint cost.
Hallway or entryway — directional accent light over artwork or console tables.

Pairs especially well with mid-century, transitional, modern farmhouse, and Scandi interiors. The walnut + brass combination flatters cream walls, leather furniture, woven textiles, and warm-neutral palettes.

Standard E26 / E27 screw-base bulb (LED or Edison; not included). E26 in North America, E27 in Europe and the UK. Because the dome is open at the bottom, vintage Edison-style filament bulbs look beautiful here — but warm-white LED Edison bulbs (2700K) are more efficient and equally flattering.

The fixture works with a common wall switch; for dimming, pair with dimmable LED bulbs and a compatible LED-rated wall dimmer. Confirm dimmer-bulb compatibility before ordering.

Dekorfine offers a 30-day return policy on undamaged items in their original packaging. Die-cast surface texture lines on the arm joints are normal manufacturing characteristics and are not eligible for return as defects. Decorative items shown in lifestyle photos are not included.

For returns, exchanges, or any questions, contact support@dekorfine.com — we reply within 24 hours.