Ceiling Fan Installation Guide:
Pre-Check & Requirements
For a safe and successful installation, please review these essential requirements before purchasing or installing your new ceiling fan.
Ceiling requirements:
1. Structural & Ceiling Requirements
First, confirm your ceiling is compatible. An improper foundation is a safety risk.
Load Bearing Capacity: The installation point must be able to support a minimum load of 50 kg (110 lbs).
Ceiling Surface: The ceiling should be flat and firm. For irregular ceilings (concave, domed), all height measurements must be taken from the ceiling's lowest point.
Sloped Ceilings: Standard installation is suitable for ceilings with an incline up to 30°. Slopes greater than 30° require a custom hook to ensure the fan hangs level.
First, confirm your ceiling is compatible. An improper foundation is a safety risk.
Load Bearing Capacity: The installation point must be able to support a minimum load of 50 kg (110 lbs).
Ceiling Surface: The ceiling should be flat and firm. For irregular ceilings (concave, domed), all height measurements must be taken from the ceiling's lowest point.
Sloped Ceilings: Standard installation is suitable for ceilings with an incline up to 30°. Slopes greater than 30° require a custom hook to ensure the fan hangs level.
Essential Clearances for Safety & Airflow:
Proper spacing is critical for optimal performance and to prevent accidents.
Distance from ceiling to fan blades: ≥22cm/8.7"
Distance from fan to surrounding walls or obstacles: ≥60cm/23.6"
Floor to Fan Blades：220 cm / 86.6"
Distance from ceiling to fan blades: ≥22cm/8.7"
Distance from fan to surrounding walls or obstacles: ≥60cm/23.6"
Floor to Fan Blades：220 cm / 86.6"
Hardware & Customization Notes Required Hardware
For Cement Ceilings: Use two (2) M6 expansion bolts.
For Solid Wood Ceilings: Use four (4) wood screws.
Custom Downrods:
If you require a non-standard downrod length, an additional fee of approximately $10 USD may apply.
Available colors: Green Bronze, Red Bronze, Matte White, Matte Black.
If no color is specified, a random color will be shipped.
Unsure About Your Setup?
For your safety and to ensure optimal performance, we strongly recommend taking a photo of your intended installation location and sending it to our online customer service team for a consultation before you buy.
For Solid Wood Ceilings: Use four (4) wood screws.
Custom Downrods:
If you require a non-standard downrod length, an additional fee of approximately $10 USD may apply.
Available colors: Green Bronze, Red Bronze, Matte White, Matte Black.
If no color is specified, a random color will be shipped.
Unsure About Your Setup?
For your safety and to ensure optimal performance, we strongly recommend taking a photo of your intended installation location and sending it to our online customer service team for a consultation before you buy.
Ceiling Height Recommended Downrod Length
(Can be adjusted according to personal aesthetic and functional preferences)
Ceiling height 2.6-3.0m: It is recommended to use the
default rod with a built-in length of 15 cm.
Ceiling height 3.0-3.5m: Use a rod with a length of 30-60cm/11.8-23.6".
Ceiling height 3.5-4.0m: Use a rod of 60cm-110cm/23.6-43.3".
Ceiling height 4.0m and above: Not recommended.
