High-fidelity 3D modeling
Visualize your custom chandelier in exquisite detail. Photoreal renderings and rotating models confirm every dimension, finish, and proportion before a single part is cast.
No results found
Try a different term, or browse our collections
A refined, focused reading lamp for the bedside or sofa-side wall. The Leo pairs a low-profile rectangular wall plate with an adjustable gooseneck arm and a cylindrical LED head — bend it where you need it, click the built-in switch, and a generous wash of warm light falls exactly where you point it. A compound lens softens glare, making this ideal for late-night reading without disturbing anyone beside you.
Gooseneck flexibility & finish detail
Bedside reading light at work
Important The Leo does not include a standard ceiling/wall canopy and is not designed to install over a junction box (J-box). Its mounting plate is solid metal with through-screws, not a hollow canopy — there's no internal cavity to enclose a J-box or splice cluster.
Because this fixture pulls power directly through the mounting plate, you'll need either: (1) an exposed power source nearby (such as the existing wall lamp's wire stub), or (2) a wall installation where wires can be brought directly to the plate without an intermediate J-box.
Please confirm your wall setup before ordering, especially in North America where most homes pre-install electrical J-boxes for sconces. If you're not sure, send us a photo of your existing wall outlet and we'll confirm compatibility within 24 hours.
The Leo is purpose-built as a bedside reading lamp or focused task light — bend the gooseneck to direct the LED toward your book or laptop, click the inline switch, and you've got a contained pool of warm light without disturbing your partner. The compound lens softens the LED's intensity, so it reads as a comfortable, glare-free wash rather than a sharp spotlight.
Equally at home above a reading chair, beside a writing desk, in a study or library nook, or as a guestroom bedside lamp. Less suited as a primary ambient or general-room light.
The mounting plate has its own push-button on/off switch — control the lamp directly at the wall plate without a separate wall switch. Not dimmable.
Light source is a built-in LED with a compound lens — no bulb to install or replace. Hours of useful life rated for years of nightly reading.
The Black finish has a different body appearance than the Brushed Bronze and Sand Nickel finishes — see the separate dimension diagram below.
Important No. The Leo's mounting plate is solid metal with through-screws, not a hollow canopy — there's no internal cavity to enclose a junction box or splice cluster. It is not designed for installation over a standard electrical J-box.
Compatible installations include: an exposed wire stub coming directly out of the wall, a surface-mounted plug-in adapter (sourced separately), or a professional electrician's modification to bring the wires directly into the plate without a J-box behind it.
Most North American homes have pre-installed J-boxes for sconces, so please confirm your wall setup before ordering. Send us a photo of the existing wall outlet and we'll confirm compatibility within 24 hours at support@dekorfine.com.
The Leo is purpose-built as a bedside reading lamp or focused task light. The flexible gooseneck lets you direct the LED exactly toward your book or laptop, while the compound lens softens the beam so it reads as a comfortable pool of warm light rather than a sharp spotlight.
Best placements: headboard wall beside a bed (one per side, or one on a single side); above a reading chair; beside a writing desk; in a study or library nook; or as a guestroom bedside lamp where you don't want a tabletop fixture taking up nightstand space.
Less suited as a primary ambient or general-room light — the beam is contained, not broad.
The Leo measures W 13.8″ × H 4.7″ (W 35 × H 12 cm) at its full extended reach (the gooseneck flexes, so the actual footprint depends on how you bend the arm). The wall plate is a low-profile rectangular shape that sits flush against the wall.
Note: the Black finish has a slightly different body appearance than the Brushed Bronze and Sand Nickel finishes — both are detailed in the size diagrams above.
The Leo has a built-in push-button switch directly on the mounting plate — no separate wall switch is required. Press the button to turn the lamp on or off. This makes it ideal for bedside use where a separate wall switch may not be reachable from the bed.
The switch is on/off only — not dimmable. The fixture is hardwired into power that runs continuously to the plate.
The light source is an integrated LED with a compound lens — no bulb to install or swap. The lens softens the beam to a comfortable, glare-free wash for reading. Output is a warm white tone designed for evening and bedside use.
The fixture is not dimmable — the built-in switch is on/off only. Because the LED is built in, the lamp is also not designed to work with external dimmers.
Brushed Bronze: warm, slightly aged bronze with a soft hand-brushed sheen. Pairs with walnut, leather, cream, and warm-neutral interiors.
Sand Nickel: muted matte nickel with subtle warm undertones. Pairs with grey, taupe, beige, and transitional interiors.
Black: matte black with a graphic, contemporary read. The Black version has a slightly different body shape than the Bronze and Nickel versions — see the dimension diagrams above.
Dekorfine offers a 30-day return policy on undamaged items in their original packaging. Important Returns due to J-box incompatibility are the customer's responsibility — please confirm your wall setup before ordering.
For returns, exchanges, or any compatibility questions, contact support@dekorfine.com — we reply within 24 hours.
Questions? support@dekorfine.com — we reply within 24 hours.
Downloads
Only documents on file are shown · 3D files on request: support@dekorfine.com
Thirty days, simply stated
Transform your concept into reality. Our dedicated design team delivers precise 2D drawings, high-fidelity 3D visualizations, and tailored customization for projects of any scale, anywhere.
Three ways our studio supports your project — from first sketch to signed-off installation plan.
Visualize your custom chandelier in exquisite detail. Photoreal renderings and rotating models confirm every dimension, finish, and proportion before a single part is cast.
Receive the technical specifications and blueprints — AutoCAD and PDF — that your architects, contractors, and electricians need for seamless site integration.
Guidance on scale, placement, and lumen output — so your fixture feels inevitable in its room, whether grand foyer or intimate dining corner.
Our in-house specialists focus exclusively on lighting — structurally sound, trend-aware, and quietly obsessive about every joint and filament.
We respect your timeline. Concept drawings and visualizations arrive quickly, so decisions — and project kick-offs — aren't held hostage by approvals.
From adjusting dimensions and finishes to designing a fixture from scratch — personalized work, at prices that remain fair to both sides.
We've collaborated on a spectrum of high-specification projects worldwide — here is what the last few years look like in numbers.
Reach out to our studio for a complimentary consultation on 3D modeling, technical drawings, or bespoke customization.
Contact our design studioWhere the LED Bedroom Art Deco Wall Light lives
Complete the room
Continue browsing

Dekorfine · Bespoke
Dimensions, finishes, materials and light source — adjusted to a room rather than a catalogue. We draw it first, you decide after.
Why Dekorfine
We design, engineer and manufacture lighting in-house — from the first sketch to the last carton sealed for shipping — and ship it to homes, hotels and design studios in more than 60 countries.
Trade & wholesale
Retailers, interior designers and hospitality professionals: verified trade accounts, up to 35% off retail, reviewed within 1 business day. FOB · EXW · CIF · DDP available.
Apply for a trade accountProfessional & hospitality