Yes. The Pleated Resin Wall Lamp is a hardwired wall sconce — it connects directly to your wall's electrical supply and is controlled by an external wall switch. In the US, hardwired fixtures typically require a licensed electrician to connect safely. The installation guide (download above) provides full wiring details for your installer.

For the softest, most flattering ambient glow through the beige resin, a G9 LED at 2700–3000 K in the 3–5W range works best — warm enough to read as candlelight without over-brightening the surface texture. G9 bulbs are widely available and are not included with the lamp.

The lamp is rated for indoor use. In a bathroom, it is suitable for dry zones — vanity walls, above a sink mirror, or on a side wall away from direct water exposure. For wet zones directly above a shower or tub, an IP44-rated fixture is required. Contact us if you need clarification for your specific layout.

Dimmer compatibility depends on both the wall dimmer model and the G9 LED bulb you select. Pairing a dimmable G9 LED with a trailing-edge (LED-compatible) wall dimmer generally works well. Confirm your bulb is labelled dimmable before purchasing — non-dimmable LEDs may flicker or fail early on a dimmer circuit.

For a bedside pair, a centre-to-centre spacing of 140–160 cm typically looks balanced on a standard queen or king headboard wall. Mount the lamp centre at roughly 150–160 cm from the floor (about pillow height plus 30 cm) — this puts the light at a comfortable reading angle without shining directly in your eyes. Your installer can confirm the exact positioning once your headboard or mirror dimensions are known.