
Gentle diffused glow
Selected high-grade fabric diffuses direct bulb glare into a gentle, relaxing light, creating an eye-friendly space for unwinding.
No results found
Try a different term, or browse our collections
An oversized fluted beige fabric shade on a warm wooden base — voluminous folds that catch the light from every angle — bringing vintage glam and a soft, warm glow to a bedside, console, nightstand, or side table without effort.
This fluted table lamp captures the eye with its voluminous beige fabric folds — an oversized shade whose pleated silhouette echoes the crisply structured lampshades of mid-century interiors. Perfectly finished in warm beige, it makes an elegant statement upon a bedside, console, or side table while the warm wooden base delivers a grounded, natural counterpoint to the fabric above. The result: a vintage pleated table lamp that reads as both sculptural and inviting, suited to any room where soft light and tactile form matter equally.
For the warmest, most flattering glow through the beige fabric shade, a 2700 K Edison-style filament LED (E26 for US, E27 for EU/AU) in the 4–8W range is ideal — warm enough to read as candlelight and bright enough for bedside reading without overwhelming the shade. Bulbs are not included and are available at any hardware or lighting retailer.
The USB cable included with the lamp allows you to charge devices — phone, earbuds, or a small tablet — directly from the lamp base without needing a separate wall adapter. It is a practical modern addition to a vintage-aesthetic lamp, keeping your nightstand or console tidy. For more detail on the cable setup, watch the Shade Installation Video in the downloads section above.
Yes — the shade attaches to the base independently. The Shade Installation Video (linked in the downloads section) shows the full attachment process step by step. If you need a replacement shade, contact us and we will advise on availability.
The lamp uses a push button cord switch and is not dimmable in its standard configuration. For adjustable brightness, a smart E26 / E27 LED bulb with its own app or remote control works within the existing socket without any rewiring — a practical solution for a bedroom nightstand lamp.
For regular maintenance, use a soft dry brush or low-suction vacuum with a brush attachment to remove dust from the folds — work top to bottom, following each pleat. Avoid water or liquid cleaners on the fabric shade, as moisture can distort the structured folds. For the wood base, a dry or barely damp cloth works well.
Questions? support@dekorfine.com — we reply within 24 hours.
Downloads
Only documents on file are shown · 3D files on request: support@dekorfine.com
Thirty days, simply stated
Estimated from dispatch 2–4 business days · express 1–3 weeks · sea 4–6 weeks. Not a delivery promise.
Dekorfine · Bespoke
Dimensions, finishes, materials and light source — adjusted to a room rather than a catalogue. We draw it first, you decide after.
Drawn, approved, built in our own workshops since 2015.Expertly tailored textile shades that diffuse harsh glare into a warm, calming ambiance for every mindful moment.
What goes into every pleated shade – from the way it softens light to the way it holds its shape.

Selected high-grade fabric diffuses direct bulb glare into a gentle, relaxing light, creating an eye-friendly space for unwinding.

Heat-set precision pleating keeps every ridge crisp and architectural. The folds resist collapsing and spring back after light pressure.

A durable flame-retardant inner lining withstands long hours of use without yellowing or odor.
The same shade from daylight to evening – switched off, then glowing.
An understated fabric sculpture by day; a soothing cocoon of warmth by night.
Your pleated shade arrives flat-packed to keep it safe in transit. A few simple steps turn it into your own handmade shade – and it’s surprisingly relaxing.
Step 1 Lay out the shade frame and the folded pleated fabric
Step 2 Hook the fabric’s built-in clips over the top ring
Step 3 Keep clipping the pleats all the way round the ring
Step 4 Join the two ends – your pleated shade is ready
Open the box and take out the white metal shade frame and the folded pleated fabric shade.
Wearing clean gloves is a good idea. Line up the top edge of the fabric with the frame’s top ring, then slot the built-in clips over the ring one by one.
Follow the curve of the ring, opening the pleats a little at a time and clipping them in so the fabric wraps smoothly and the folds sit evenly.
Once you’ve gone all the way round, join and secure the two ends. Give the pleats a light tidy – your shade is ready.
Pleat density and cut change both the look of the shade and the way it spreads light.
Flared umbrella shadeShop lamps with this shade
Fluted petal with trim shadeTap a color to try it on both shades.
Clean and airy, with high light transmission for a fresh, soft warm-white glow.
Deep and mellow – a vintage tint when off, and a rich, cosy glow once it’s on.
A little regular care keeps the pleats crisp and the color true.

Sweep gently from top to bottom along the pleats with an anti-static duster, or use a hair dryer on a cool, low setting to clear dust from the folds.

Dab gently with a soft cloth, warm water and a mild detergent. Don’t scrub, so the pleats keep their shape, then let it air-dry somewhere cool and ventilated.

Fade-resistant fabric keeps its color and crisp shape. Avoid long hours of strong, direct sunlight.
Where the Vintage Fluted Beige Table Lamp lives
Complete the room
Same soft fabric shadesStainless Steel Table Lamp$255.00 · Table Lamp
Same soft fabric shadesCaprani Wooden Floor Lamp$560.00 · Floor Lamp
Same soft fabric shadesDippa Pendant Lamp$209.00 · Pendant Lamp
Same soft fabric shadesPlanas Pendant Lamp$255.00 · Pendant Lamp
Same soft fabric shadesLanna Tassel Table Lamp$239.00 · Table Lamp
Same soft fabric shadesVintage Fluted Table Lamp$135.00 · Table Lamp
Same soft fabric shadesStringer Table Lamp$169.00 · Table Lamp
Same soft fabric shadesVintage Fluted Plug In Wall Lamp$196.00 · Wall Lamp
Continue browsing

Dekorfine · Bespoke
Dimensions, finishes, materials and light source — adjusted to a room rather than a catalogue. We draw it first, you decide after.
Why Dekorfine
We design, engineer and manufacture lighting in-house — from the first sketch to the last carton sealed for shipping — and ship it to homes, hotels and design studios in more than 60 countries.
Trade & wholesale
Retailers, interior designers and hospitality professionals: verified trade accounts, up to 35% off retail, reviewed within 1 business day. FOB · EXW · CIF · DDP available.
Apply for a trade accountProfessional & hospitality